The CyberData 2-Port PoE Gigabit Port Mirroring Switch enables users of a network attached device to split a single 802.3af or 802.3at PoE powered Gigabit Ethernet port into two Gigabit Ethernet ports for diagnostics purposes while still maintaining a PoE connection to the attached device.
- Port Mirroring
- 2-Port auto-negotiating (no crossover cable required)
- 10.100.1000 full duplex (PoE-powered)
- Link/Status and connection speed LEDs
- VLAN Packet Forwarding
- 9216-byte jumbo packet length forwarding at wire speed
- RoHS compliant
Power Distribution
- The PD input can be up to 30W.
- A 802.3af source @ 15W
- A 802.3at source @ 25W
- A non-compliant PoE injector up to 30W
- The internal circuits on the splitter takes 2W to operate.
- With an 802.3af input, 13W are available to share between the two PSE outputs.
- With an 802.3at input, 23W are available to share between the two PSE outputs.
- With a non-compliant 30W PoE injector, 28W are available to share between the two PSE outputs.
- Either one or both of the PSE outputs can provide PoE power as long as the overall PSE output wattage is 2W less than the PD input.
Specifications:
| Uplink In Port |
PD 802.3af or 802.3at |
| Downlink Out Port |
PSE 802.3at (limited PD input) |
| Dimensions |
134.7 x 77 x 27 mm |
| Warranty |
2 years |
| Unit Weight |
0.56 lbs. |
| Standards |
IEEE |
| Modes |
10BASE-T, 100BASE-TX, and 1000BASE-T |
| LEDs |
Link/Status and Connection Speed |
| Operating temperature |
0 to 70 degrees Celsius |
| Part Number |
011258 |
